Medisana IN 550 Instruction Manual Page 27

  • Download
  • Add to my manuals
  • Print
  • Page
    / 142
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 26
3 Operating
GB
19
WARNING
Clean and disinfect the nebulizer kit as described under "4.1
Cleaning and maintenance" in order to avoid a possible infection
by contaminated parts!
Additionally general hygiene regulations (e.g. thoroughly washing
the hands, hygienic handling of the medication) must be observed.
3.1
Preparing
for
inhalation
NOTES
- Make sure that all parts are firmly connected to each other.
The air tube needs to be securely attached to the compressor
(main unit) and nebulizer kit.
- Take care not to spill any medication.
- Use the nebulizer kit holder as a temporary holder for the
nebulizer kit.
NOTE
Before starting therapy, discuss the length, dosage and frequency
of use with your doctor. The method of use should be appropriate
to the aim of the therapy (e.g. lung treatment = use of mouthpiece
and treatment of the nasal-pharyngeal area = use of mask).
Consult your doctor about this aspect as well.
1.
2.
3.
4.
5a.
5b.
Rotate the inhalation top counterclockwise to remove it from the
nebulizer tank . g
Place the vaporizer head on the nozzle . g
Fill in the correct amount (min. 2 ml and max. 10 ml) of prescribed
medication into the nebulizer tank . If you have overfilled the tank
pour all the liquid out and clean the nebulizer kit as described
under point "4.1 Cleaning and maintenance". g
Rotate the inhalation top clockwise to properly fix it on the nebulizer
tank . g
Plug either the mouthpiece , or a nose adaptor ( or ) with the
connection tube for mouthpiece and nose adaptor onto the inhalation
top. Therefore the connection tube needs to be put onto the nozzle
on the upper part of the inhalation top with the longer end. Then the
mouthpiece or the nose adaptor ( or ) needs to be connected
to the shorter end of the connection tube . g
Alternatively, you may use the adult or child mask ( or ) for the
inhalation. Therefore you need the mask connection tube instead of the
connection tube . Make sure, the power switch is turned off ("O").
Connect the power plug to the mains outlet and place one end of the
air tube firmly over the connection for air tube of the compres-
sor. Place the other end over the appropriate connection for air tube f
of the nebulizer kit.
Page view 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 141 142

Comments to this Manuals

No comments