Medisana Bob Instruction Manual download pdf (Page 23)

After you have chosen a program, press the On- / Increase intensity

- button again to start the training. G

NOTE

The device only starts the pulse emitting when proper contact of

the electrodes to the skin is present. If the device does not

detect proper contact, a long beep can be heard and the device

switches to the program select mode. Check for proper

attachment of the belt to your body.

The displayed time (program duration) will start to count down to 0.

You may experience a light formication during the usage. With in-

creasing intensity you will feel the contracting abdominal muscles,

which then will relax again after some seconds. At the end of the

program two beeps (one short and one longer beep) will be emitted

and the device will stop the pulse emission. You may also manually

stop the pulse emission by pressing & holding the Off- / Reduce inten-

sity - / Program button until the device switches off or by

multuiple presses on the button until the intensity level is set to 1.

Another press on the button then leads to a stop of pulse emission.

WARNING

3.3

Intensity

setting

During the use you may adjust the intensity with the - and -

buttons in 25 levels. A decrease of the intensity is always possible by

pressing the - button. Is the lowest level (1) already set and the

- button is pressed again, the device will stop the pulse emission.

Press the - button to increase the intensity by 1 setp (max. up to

25). To avoid unintended increase of the intensity, the device will auto-

matically switch on the keylock function after approx. 5 seconds without

pressing any button. At this time, the display backlight will extinguish

and the keylock symbol appears in the LC-display . To un-

lock the key function, press . This also decreases the intensity

right away by 1 step (if the intensity is already at level 1, the unit will stop

the pulse emission). An increase of the intensity is only possible without

active keylock function.

Only adjust the intensity level as high as it still feels pleasant for you.

If you feel uncomfortable during the use of the unit, adjust a

lower intensity. Is it still feeling uncomfortable or if the skin

is itching or aching, immediately stop the usage and consult

a doctor.

3 Operating

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 109 110

No comments

Medisana Bob Instruction Manual Page 23