Medisana FS 885 Instruction Manual download pdf (Page 17)

3 Operating / 4 Miscellaneous

3.1 Filling with water

Before filling the device with water, make sure that no mains leads are connected, i.e. the electricity

lead must not be plugged-in! When the foot spa comfort is securely placed on the floor (ensuring that

it cannot tip over), and has been filled with water, insert the mains plug into the power supply socket.

The MEDISANA FS 885 foot spa can be filled with up to 6 litres of water. The maximum filling height

is marked



in the foot spray bath. You can use cold or warm water with or without bath additives,

just as desired.

CAUTION

Make sure that you use your MEDISANA foot spa comfort on a safe and

even surface that is not sensitive to moisture.

Never use any foaming bath additives or bath salts.

3.2 Function setting

ON/OFF

After connected with the mains, press the button



to switch on the appliance. The display



shows

the starting temperature. When you press the switch



again, the appliance will be shut down.

Temperature

The MEDISANA

FS 885

foot spa comfort includes an innovative heating function. This technical

improvement makes it possible to keep the water at a constant temperature during application or to warm

it. When you switch on the device, the starting temperature appears in the display



. Each time you

press button



, the set temperature increases by 3 °C up to 39 °C. From 39 to 48 °C, the temperature

increases by 1 °C each time you press button



. When the device is on, the current temperature is always

shown in display



Timer

Generally speaking you can take about 20 minutes for a footbath with a massage, once or twice daily.

When you switch on the device with button



, operation time is set to 20 minutes. Press button



to prolong the operation time in 10 minute steps up to 60 minutes. You should ensure that the

device has completely cooled off before it is used again!

air jet / vibration / red light

The device also has air jet/vibration/red light functions. Press button



to switch on the functions.

Pressing the button



again, the bubble function will be closed.

WARNING

If you are very sensitive to heat, have cardiovascular problems, swellings,

inflammations, skin irritation or skin wounds, please consult your doctor

before use.

4 Miscellaneous

4.1 Cleaning and maintenance

• Before cleaning the device, make sure that it is turned off and the mains plug is removed from the

socket. Pour the water out of the device from one of the corners at the back and clean the device

with a cloth when it has cooled off.

88378_FS885_West_Final_22082013.qxd:Fußsprudelbad 22.08.2013 17:21 Uhr Seite 11

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 67 68

Comments to this Manuals

No comments

Medisana FS 885 Instruction Manual Page 17

Comments to this Manuals

Related products and manuals for Foot baths Medisana FS 885