Medisana 88245 Datasheet download pdf (Page 19)

3 Operation

3.1

Preparing

the appliance

• Make sure the power cord is disconnected from the socket.

• Make sure the facial sauna is standing on a level, secure surface (such as a

table).

• Fill the water tank



with tap water. Always use the measuring cup



;

never fill the tank directly from the tap.

• Do not use any liquids other than water.

• In hard water areas, it is advisable to fill half the tank with demineralised

(not distilled) water.

• Do not fill the water tank



higher than the maximum marking



• Fasten the steam attachment



(or



) to the main appliance



turning it clockwise until you hear it catch.

• When completely filled



the appliance can be used for up to 20 minutes

until the water has evaporated from the tank



• Plug the power cord into the socket.

• When the appliance is ready, switch it on using the ON/OFF button



. The

red indicator lamp



lights up. The water is heated and in a few minutes

steam comes out of it. You can switch the appliance off at any time using

the ON/OFF button



• Sit down in front of the appliance. Lean forward so that your face is over

the steam attachment



• Do not put your face too close to the steam attachment



; always keep at

a sufficient distance so that your skin does not become too hot.

• Do not use the steam attachment



for more than 20 minutes. If the ap-

pliance is used by several people in succession, each one should not use it

with the steam attachment



for more than 20 minutes in the course of a

day. Do not use the appliance more than two or three times per week.

• If the water has evaporated or if you want to switch the appliance off, press

the ON/OFF button



. The red indicator lamp



goes out.

• Unplug the power cord from the mains and let the appliance cool down for

at least 10 to 15 minutes before taking off the steam attachment



and

emptying the water tank.

• Take the steam attachment off the main appliance by turning it anticlock-

wise.

• Pour the remaining water out of the tank over a sink or basin.

• When you have finished using the sauna, wash your face with cold water.

Then apply your moisturiser to your face, or suitable cleaning or peeling

cream.

• You can turn the steam outlet plate



to regulate the amount of steam

coming from the water tank.

• To shorten the heating time, you can close the steam outlet plate



turning it clockwise as far as it will go.

• When the steam outlet plate



is closed, the steam escapes via the steam

valve



on the rear below the steam attachment.

• Never touch or cover the steam valve, as this can lead to scalding.

3.2

Using the steam

attachment

for your face

3.3

Adjustable

steam valve

88240_FSS_Gesichtssauna_WL_Final.qxd:White Line 01.07.2009 8:43 Uhr Seite 13

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 89 90

Comments to this Manuals

No comments

Medisana 88245 Datasheet Page 19

Comments to this Manuals