Medisana HKM Instruction Manual Page 15

  • Download
  • Add to my manuals
  • Print
  • Page
    / 76
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 14
Please check first of all that the unit is complete and is not damaged in any way. If
in doubt, do not use the appliance. Send it to a service point.
The following parts are included:
E
E
Thank you very much for your confidence in us and congratulations!
2 Operating
2.1 Items supplied and packaging
2.2 Operation
With this heat pad resp. heat pad for neck and back you have purchased a quality
product by MEDISANA. To ensure the best results and long-term satisfaction with
your heat pad resp. heat pad for neck and back, we recommend that you read the
following operating and maintenance instructions carefully. E
1 MEDISANA with removable control
unit
1 Instruction manual
heat pad resp. heat pad for neck and back
You can use the MEDISANA heat pads to gently warm and relax various parts of
the body. Using the heat pad stimulates blood circulation in hardened muscles and
helps you to relax after a strenuous day.
The heat pad features an electric temperature control that regulates the tempera-
ture according to the chosen setting. Only use the heat pad in the cover supplied
with it.
G
G
The packaging can be reused or recycled. Please dispose properly of any packag-
ing material no longer required. If you notice any transport damage during un-
packing, please contact your dealer without delay. G
WARNING
Please ensure that the polythene packing is kept away from the
reach of children! Risk of suffocation!
Make sure, the connection cable of the control unit is properly connected to the
plug of the heat pad. Plug the unit into the mains outlet and move the slider control
from position 0 to position 1. The power LED will light up in orange (warm up
phase) and after reaching the final temperature level it will light up in green.
After a few minutes you will be able to feel the pad getting noticeably warmer. If
you require a higher temperature setting, move the switch to the next positions 2
or 3 or the maximum heat setting, position 4. If the heat pad gets too hot for you,
move the slider back to position 3, 2 or 1. After a short time, the heat pad will cool
down. The heat pad has an accurate electronic control system. Depending on the
room temperature, the LED may change from orange to green colour and back
within seconds. This indicates the fast re-heating and is normal.
To switch the unit off, move the switch back to position 0. The power LED will go
out, indicating that the unit is switched off. Unplug the unit from the mains outlet.
Move the switch to position 1 for any continuous use. The heat pad will switch
off automatically after approx. 90 minutes of continuous use. To switch it back on
again, move the slider switch to position 0 and then back to the desired heat
setting. Unplug the unit from the mains outlet once you have finished using it.
G
G
G
11
GB
2 Operating
Page view 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 75 76

Comments to this Manuals

No comments