Medisana FTO Operations Instructions download pdf (Page 19)

19

GB

4 Miscellaneous

4.1 Explanation of display symbols

and error messages

Display Description

SWITCHING ON

All symbols are displayed for 2 seconds.

Memory Function

Automatic display of the last reading for

3 seconds.

The display remains illuminated for 2 seconds.

No tone.

SELF-TEST

The symbol “Err” indicates an error.

You will hear three short tones and the display

will remain illuminated for 5 seconds.

The thermometer switches off after 60 seconds.

READY FOR READING

You will hear a short tone.

The °C or °F symbol flashes.

Give the START button



a short press to start

the reading.

READING COMPLETED

You will hear a long tone.

The display remains illuminated for 5 seconds.

The crossed-out ear symbol is displayed if the

result is not within the temperature range 32 °C

to 42,2 °C.

If the result is greater than or equal to 37,5 °C

(99,5 °F), the fever alarm will be activated

(10 short tones).

FURTHER READINGS

When the °C or °F symbol starts to flash again,

the thermometer is ready to take the next

reading. The unit switches off automatically

after 60 seconds if no further buttons are

pressed.

The temperature measured is too high.

“H” appears in the display when the tempera-

ture reading taken is above 100 °C or 212 °F.

The temperature measured is too low.

“L” appears in the display when the tempera-

ture reading taken is below 0 °C or 32 °F.

°C

°C

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 97 98

Comments to this Manuals

No comments